The critical elements of truss trimmers are that their length is accurate and the ability to be mechanically nailed into the end securely and safely by the truss erectors on site.

Usually, either 70×35 or 90×35 timber is used for this application though it is not the dimension that is most important; it is the length.

Programmed Timber Truss Trimmers could improve your business in several ways:

Material supply: The source material used in a Programmed Timber Truss Trimmer comes from an allocation of reliable domestic softwood resources that are not subject to structural framing supply availability.

Assured production: The Programmed Timber processing operation is of significant scale and volume throughput. Our capital commitment has been made to produce junction blocks significantly faster than what can be produced by and bundled in an individual plant.

Lower cost than ‘waste’: Truss trimmers are often accumulated in a plant as a ‘recovery’ product from ‘waste’. When done so the cost of each unit is high compared to a pre-cut product. Successful active management of the high-cost structural resource to reduce the costs paid for ‘waste’ enables plants to supplement with zero labour cost pre-cut truss trimmers.